[LNX-002] RS-232C LAN Converter (PoE/Non-PoE) Rev3
Possible to control RS-232C devices via Ethernet
Easy configuration by microSD
Overview
LNX-002 is a LAN converter which makes it possible to use RS-232C devices via Ethernet local area network. Tunneling mode is available by connecting with LNX-001 (USB to LAN converter) or LNX-002. And by using TCP/UDP or Telnet, direct control from PC is also available.
LNX-002 supports PoE function as a standard model, making it possible to be powered via LAN cable (PoE compatible HUB or other is required). It can also be operated from AC adapter. LNX-002e is an economy model of LNX-002 from which only PoE function is removed. It requires AC adapter for power supply.
Network setting can be set by a microSD card. Restoring the setting information from a microSD card is very convenient when replacing LNX-002.
*Attachment A for panel mount is separately sold part.
Features
- Possible to control RS-232C devices via Ethernet local area network
- Tunneling mode is available by connecting with the two LNX-002
- Half-duplex / Full-duplex (auto detected)
- Easy configuration by microSD
- It is easily restored at the time of the exchange by microSD.
- It can send configuration data by e-mail attachments.
- It is setable in PC out of the network segment.
- Backup of the configuration data is easy.
- Configuration is possible via LAN by LNX SETTING TOOL
- Possible power supply from the LAN cable by PoE function
- Supports Virtual COM port
- Reliable industrial grade design
- ESD and surge protection
- Housing material: Plastic
- DIN rail, magnet, and screw mountable (Attachment is required)
- Includes a microSD card (with USB adapter)
- Includes an AC adapter
- RoHS and CE compliant (except for PoE function)
- MADE IN JAPAN
Connection example
[Tunneling mode between two LNX-002]
Direct communication between the two LNX-002 without PCs offers you to connect separated a RS-232C networks. By using cross cable, one to one connection is also available.
[Tunneling mode between LNX-001 and LNX-002]
LNX-001 offers you to control as USB interface via the LAN. By connecting this with LNX-003 in tunneling mode, virtual COM port and D2XX-API by FTDI is available.
Technical knowledge about the network is not needed.
[LNX-002 single operation]
Communication with RS-232C devices via Ethernet local area network is available.
[Connection to the printer]
LNX-002 can output the RS232C data to the LAN-compatible printers.
*When the RS232C data do not match to a printer, it may not be printed. Please feel free to ask us about that by an inquiry form or e-mail.
Specification
Item | Description | Remarks |
---|---|---|
Model | LNX-002/LNX-002e | |
Input Power | 5VDC Supplied by AC adapter or by LAN connector (PoE function) (LNX-002e is not supported the PoE function) |
PoE function supports both mode A and B |
Current Consumption | Less than 350 mA | |
Network Interface | IEEE802.3(10Base-T) IEEE802.3u(100Base-TX) half-duplex / full-duplex (auto detected) |
|
LAN Connector | RJ45 | ESD protection Isolation over 1500VDC |
Protocol | TCP/UDP/Telnet | |
Interface | RS-232C | ESD protection |
RS232C Connector | D-SUB 9pin Male (#4-40 UNC) | |
Memory Card | microSD card | For configuration |
Baud Rate | 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 bps | |
Data Bits | 7 or 8 bits | |
Stop Bits | 1 or 2 bits | |
Parity | Even, Odd, No parity | |
LED | POW: Power LED RX: Reception LED TX: Transmission LED SYS: System Status LED LINK (RJ45 Connector): LINK Status ACT (RJ45 Connector): ACT Status |
|
Operating Ambient Temperature | -10 to +55 °C | No condensation permitted |
Operating Ambient Humidity | 30 to 85 % RH | No condensation permitted |
Storage Ambient Temperature | -20 to +60 °C | No condensation permitted |
Storage Ambient Humidity | 30 to 85 % RH | No condensation permitted |
Noise Tolerance | Not defined | |
Transmission and other Standard | Not defined | |
CE Compliant | EMS:EN61000-6-2 - IEC61000-4-2 Electrostatic discharge requirements - IEC61000-4-3 Radiated electromagnetic field requirements - IEC61000-4-4 Electrical fast transient burst requirements - IEC61000-4-5 Surge immunity test requirements - IEC61000-4-6 Conducted radio frequency requirements EMI:EN61000-6-4 - EN61000-6-4(2007)+A1(2011) Radiated Emissions - EN61000-6-4(2007)+A1(2011) Conducted Emissions |
This product has applied the common standard for industrial environment EN61000-6-2 and EN61000-6-4 (except for PoE function) |
Weight | Approx. 120 [g] | Only main body |
Dimensions | 69 x 82.5 x 30 [mm] (2.717" x 3.248" x 1.181") |
Without projections |
RS232C Connector pinouts
Pin No | Name | Direction | Notes |
---|---|---|---|
1 | (DCD) | IN | Not supported |
2 | RXD | IN | |
3 | TXD | OUT | |
4 | DTR | OUT | |
5 | GND | - | Signal ground |
6 | DSR | IN | |
7 | RTS | OUT | |
8 | CTS | IN | |
9 | (RI) | IN | Not supported |
CASE | FG | - | Connected to GND |
LNX SETTING TOOL
This application makes configured data of the LNX series.
After saving the configuration data to the microSD, and insert the product it.
It will be automatically set by turning on the power of LNX-002.
Then backup file is made to microSD card automatically.
Package Contents
- LNX-002 or LNX-002e
- microSD card(with USB adapter)
- AC adapter
- Driver & Application CD
Documentation
Price and Optional Accessories
Description | MODEL | Image | List Price (JPY) | Stock Status |
---|---|---|---|---|
RS232C LAN Converter Rev3 | LNX-002 | |||
RS232C LAN Converter economy type Rev3 |
LNX-002e | Not supported PoE function |
||
Attachment with clamping screw | PEN-003 | |||
Attachment for 35mm DIN rail |
PEN-003-DIN | |||
Attachment with neodymium magnet |
PEN-003-MG |