[LNX-004] RS-485/422 LAN Converter [D-sub 9pin type] (PoE/Non-PoE) Rev2
Possible to control RS-485/422 devices via Ethernet
Easy configuration by microSD
LNX-004 is a LAN converter which makes it possible to use RS-485/422 devices via Ethernet local area network. LNX-004e is an economy model of LNX-004 which only PoE function is removed.
LNX-004 has obtained the CE marking.(except for PoE function)
Overview
LNX-004 is a LAN converter which makes it possible to use RS-485/422 devices via Ethernet local area network. RS-485/422 side is isolated and the LAN interface is also isolated, so LNX-004 consists of double isolation. Tunneling mode is available by connecting with LNX-001 (USB to LAN converter) or LNX-004. In that case, connecting with devices in other RS-485/422 network is possible. And by using TCP/UDP or Telnet, direct control from PC is also available.
LNX-004 supports PoE function as a standard model, making it possible to be powered via LAN cable (PoE compatible HUB or other is required). It can also be operated from AC adapter. LNX-004 is an economy model of LNX-004 from which only PoE function is removed. It requires AC adapter for power supply.
Network setting can be set by a microSD card. Restoring the setting information from a microSD card is very convenient when replacing LNX-004.
*Attachment A for panel mount is separately sold part.
■ Tonneling mode example
By using TCP/IP or Telnet, direct control from PC is also available.
Features
- Possible to control RS-485/422 devices via Ethernet local area network
- Tunneling mode is available by connecting with two LNX-004
- Half-duplex / Full-duplex (auto detected)
-
Easy configuration by microSD
- It is easily restored at the time of the exchange by microSD.
- It can send configuration data by e-mail attachments.
- It is setable in PC out of the network segment.
- Backup of the configuration data is easy.
- Configuration is possible via LAN by LNX SETTING TOOL
- Possible power supply from the LAN cable by PoE function
- Supports Virtual COM port
- Reliable industrial grade design
- ESD and surge protection
- Housing material: Plastic
- DIN rail, magnet, and screw mountable (Attachment is required)
- Includes a microSD card (with USB adapter)
- Includes an AC adapter
- RoHS and CE compliant (except for PoE function)
- MADE IN JAPAN
Connection example
[Tunneling mode between two LNX-004]
[Tunneling mode between LNX-001 and LNX-004]
LNX-001 offers you to control as USB interface via the LAN. By connecting this with LNX-004 in tunneling mode, virtual COM port and D2XX-API by FTDI is available.
[LNX-004 single operation]
Communication with RS-485/422 devices via Ethernet local area network is available.
Specification
Item | Description | Remarks |
---|---|---|
Model | LNX-004/LNX-004e | |
Power |
5VDC Supplied by AC adapter or by LAN connector (PoE function) (LNX-004e is not supported the PoE function) |
PoE function supports both mode A and B |
Current Consumption | Less than 350 mA | |
Network Interface |
IEEE802.3(10Base-T) IEEE802.3u(100Base-TX) half-duplex / full-duplex (auto detected) |
|
LAN Connector | RJ45 |
ESD protection Isolation over 1500VDC |
Protocol | TCP/UDP/Telnet | |
Interface |
RS-485 / RS-422 (2 wire or 4 wire) isolated from inner circuit (DC3000V) |
ESD protection |
Connector | D-SUB 9pin Male (#4-40 UNC) | M2.6 screws are also included in the package |
Memory Card | microSD card | For configuration |
Baud Rate | 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 bps | |
Data Bits | 7 or 8 bits | |
Stop Bits | 1 or 2 bits | |
Parity | Even, Odd, No parity | |
LED |
PWR: Power LED RX: Reception LED TX: Transmission LED SYS: System Status LED LINK (RJ45 Connector): LINK Status ACT (RJ45 Connector): ACT Status |
|
Operating Ambient Temperature | -10 to +55 °C | No condensation permitted |
Operating Ambient Humidity | 30 to 85 % RH | No condensation permitted |
Storage Ambient Temperature | -20 to +60 °C | No condensation permitted |
Storage Ambient Humidity | 30 to 85 % RH | No condensation permitted |
CE Compliant |
EMS:EN61000-6-2 - IEC61000-4-2 Electrostatic discharge requirements - IEC61000-4-3 Radiated electromagnetic field requirements - IEC61000-4-4 Electrical fast transient burst requirements - IEC61000-4-5 Surge immunity test requirements - IEC61000-4-6 Conducted radio frequency requirements EMI:EN61000-6-4 - EN61000-6-4(2007)+A1(2011) Radiated Emissions - EN61000-6-4(2007)+A1(2011) Conducted Emissions |
This product has applied the common standard for industrial environment EN61000-6-2 and EN61000-6-4 (except for PoE function) |
Weight | Approx. 120 [g] | Only main body |
Dimensions |
69 x 82.5 x 30 [mm] (2.638" x 3.248" x 1.181") |
Without projections |
RS232C Connector pinouts
D-sub 9 pin male connector
#4-40 UNC screws are mounted by factory setting. You can change them to attached M2.6 screws.
Pin No | Name | Direction | Notes |
---|---|---|---|
1 | RD + | IN | Receive data + |
2 | RD - | IN | Receive data - |
3 | SD + | OUT | Transmit data + |
4 | SD - | OUT | Transmit data - |
5 | GND | - | Signal ground |
6 | (GND) | - | (Signal ground) |
7 | (GND) | - | (Signal ground) |
8 | (GND) | - | (Signal ground) |
9 | (GND) | - | (Signal ground) |
CASE | FG | - |
Frame Ground (Connected to GND) |
LNX SETTING TOOL
This application makes configured data of the LNX series.
After saving the configuration data to the microSD, and insert the product it.
It will be automatically set by turning on the power of LNX-004.
Then backup file is made to microSD card automatically.
Package Contents
- LNX-004 or LNX-004e
- microSD card (with USB adapter)
- AC adapter
- Driver & Application CD
Documentation
Price and Optional Accessories
Description | MODEL | Image | List Price (JPY) | Stock Status |
---|---|---|---|---|
RS-485/422 LAN Converter [DB9 type] Rev2 |
LNX-004 |
|
||
RS-485/422 LAN Converter [DB9 type] economy type Rev2 |
LNX-004e |
Not supported PoE function |
||
Attachment with clamping screw |
PEN-003 | |||
Attachment for 35mm DIN rail |
PEN-003-DIN | |||
Attachment with neodymium magnet |
PEN-003-MG |