[USB-501] USB to RS-232C Converter Compact
Compact isolated USB RS-232C Converter
Supports up to 1 Mbps, and custom baud rate setting
Permalink of this page:
Overview
USB-501 is a USB to RS232C converter that isolated with 2500VDC between RS232C and a USB port. It supports High Speed baud rates of up to 1Mbps. The device driver uses the standard CDC (Communication Device Class) driver included in the OS.
The properties of data bits length, stop bits and parity check are fixed. Those settings are available for the high-function type product USB-511.
Features
- Supports RS232C
- 2500VDC bus isolation
- Baud rate up to 1Mbps
- Supports custom baud rate
- Auto transmit data control
Built-in USB-serial chip has auto transmit controller and the driver is activated when it transmit the data - Controllable from embedded Linux devices
It operates as a device of the standard CDC-ACM class.
For Linux distributions with embedded CDC-ACM device drivers, you can use them without installing the drivers.
We do not support the use of Linux itself. - No external power supply is required
USB-501 is powered through a USB port (Bus-powered) - Reliable industrial grade design
- ESD and surge protection
- Housing material: Plastic
- DIN rail, magnet, and screw mountable (Attachment is required)
- Includes a USB cable (1.8m)
- Non-use of 10 Restricted substances of RoHS directive
- MADE IN JAPAN
Specification
Item | Description | Remarks |
---|---|---|
Model | USB-501 | |
Input Power | 5VDC Supplied through a USB port (Bus-powered) |
No external power supply required |
Current Consumption | Less than 100 mA | |
I/O Interface | RS-232C | ESD protection |
Communication Method | Asynchronous Serial Communication |
|
HOST Interface | USB 2.0 compliant Support Full Speed (12 Mbps) |
USB 1.1 compatible ESD protection |
Baud Rate | 300 bps to 1 Mbps | Support custom baud rate |
Data Bits | 8 bit (Fixed) | |
Stop Bits | 1 bit (Fixed) | |
Parity | No-parity (Fixed) | |
Flow control | RTS/CTS (Fixed) | |
FIFO RX Buffer Size | 128 bytes | |
FIFO TX Buffer Size | 128 bytes | |
Isolation Method | Bus Isolation | |
Isolation Protection | 2500VDC | Designed value |
USB Driver | Virtual COM port driver | |
Support OS | Windows 10/8.1/8/7 | |
LED | PWR: USB bus power TX/RX: Transmit/Receive data, Bi-color LED (TX: green, RX: red) |
|
USB Connector | Standard Type B Female | |
RS232C Connector | D-SUB 9pin Male (#4-40 UNC) | |
Operating Ambient Temperature | -20 to 60℃ (-4 to 140 [°F]) | No condensation permitted |
Operating Ambient Humidity | 30 to 85%RH | No condensation permitted |
Storage Ambient Temperature | -20 to 55℃ (-4 to 131 [°F]) | No condensation permitted |
Storage Ambient Humidity | 30 to 85%RH | No condensation permitted |
Weight | Approx. 50 [g] | Only main body |
Dimensions | 67 x 43.5 x 27 [mm] (2.638" x 1.713" x 1.063") |
Without projections |
* Power saving function (suspend, standby, sleep and others) is not supported
RS232C Connector pinouts
Pin No | Name | Direction | Notes |
---|---|---|---|
1 | NC | - | |
2 | RXD | IN | Receive data |
3 | TXD | OUT | Transmit data |
4 | DTR | OUT | Data terminal ready |
5 | GND | - | Signal ground |
6 | DSR | IN | Data set ready |
7 | RTS | OUT | Request to send |
8 | CTS | IN | Clear to send |
9 | NC | - | |
CASE | FG | - | Connected to GND |
Package Contents
- USB-501
- USB cable 1.8m
Documentation
Price and Optional Accessories
Description | MODEL | Image | List Price (JPY) | Stock Status |
---|---|---|---|---|
USB to RS-232C Converter Compact |
USB-501 | |||
Attachment with clamping screw |
PEN-003 | |||
Attachment for 35mm DIN rail |
PEN-003-DIN | |||
Attachment with neodymium magnet |
PEN-003-MG |