[USB-53G1] USB3.0/3.1 Gen1 Isolator Compact Rev2
Improved reliability is protected from the noise by an isolated.
Super Speed (5Gbps) compliant
Overview
USB-53G1 is a USB 3.0/3.1 Gen1 Super Speed (5Gbps) compliant isolator which isolates between a USB host and a USB peripheral device with 4000VDC.
With USB-53G1, it can be expected to eliminate ground loops that can cause measurement errors and equipment from surges, common-mode voltage, static discharge, magnetic fields, and radio frequency interference.There is no need to install any drivers. It works with every operating system such as Windows, Linux, Mac OS X.
Second and subsequent images are CG models
* Image with optional accessories
Features
- USB3.0/3.1 Gen1 Super Speed (5Gbps)
USB2.0 High Speed (480 Mbps) Full (12Mbps) Speed and Low Speed (1.5Mbps) compliant
USB2.0 High Speed and Low Speed are supported from Rev2. - USB host connector which is standard Type B female and have to be connected to a PC or other USB host device
- USB target connector which is standard Type A female and have to be connected to a USB peripheral device
- OS-Independent (No drivers required)
- USB-53G1 is powered through a USB port (Bus-powered)
- 4000VDC bus isolation
- ESD and surge protection
- Built-in common mode filter for radiation noises
- Housing material: Plastic
- DIN rail, magnet, and screw mountable(Attachment is required)
- Includes a USB3.0 A-B cable 200 [mm]
- Non-use of 10 Restricted substances of RoHS directive
- MADE IN JAPAN
Specification
| Item | Description | Remarks |
|---|---|---|
| Model | USB-53G1 | |
| Input Power | 5VDC Supplied through a USB port (Bus-powered) |
|
| Current Consumption | Less than 100mA + current of the target device | Max. of 400mA on the target side *2 |
| HOST Interface | USB 3.0/3.1 Gen1 Supports Super (5Gbps) USB 2.0 High Speed (480Mbps) *1 Full Speed (12Mbps) Low Speed (1.5Mbps) *1 |
USB 1.1 compatible ESD protection  |
| Isolation Protection | 4000VDC | Designed value |
| Support OS | OS-Independent (No drivers required) |
|
| LED | PW: Power LED TG PW: Target power LED |
|
| Operating Ambient Temperature | -20 to 60℃ ( -4 to 140 [°F] ) | No condensation permitted |
| Operating Ambient Humidity | 30 to 85%RH | No condensation permitted |
| Storage Ambient Temperature | -20 to 60℃ ( -4 to 140 [°F] ) | No condensation permitted |
| Storage Ambient Humidity | 30 to 85%RH | No condensation permitted |
| Noise Tolerance | Not defined | |
| Transmission and other Standard | Not defined | |
| Weight | Approx. 50 [g] | Only main body |
| Dimensions | 67 x 43.5 x 27 [mm] (2.638" x 1.713" x 1.063") |
Without projections |
- USB2.0 High Speed and Low Speed are supported from Rev2.
- The current that can be supplied to the target side depends on the power supply capacity of the host side. Additionally, please note that due to the efficiency of the internal DC/DC converter, the host side requires more current than the target side.
* There is a case to be changed to the parts of the compatibility.
* Power saving function (suspend, standby, sleep and others) is not supported.
Package Contents
- USB-53G1
- USB3.0 A-B cable 200 [mm]
Documentation
User's manual, Outline Drawing, etc
Price and Optional Accessories
| Description | MODEL | Image | List Price (JPY) | Stock Status |
|---|---|---|---|---|
| USB3.0/3.1 Gen1 Isolator | USB-53G1 |  |
||
| Attachment with clamping screw | PEN-003 |  |
||
| Attachment for 35mm DIN rail |
PEN-003-DIN |  |
||
| Attachment with neodymium magnet |
PEN-003-MG |  |
Ordering
[ ]
